How To Install Metal Roofing On A Steep Roof

Align the first metal roofing panel so that it overlaps the edging by 1 2 to 3 4 of an inch and is square to the roof line.

How to install metal roofing on a steep roof.

Install the roofing screws vertically along each rib in the panel. Cut the shingles to fit around the flange s dome. Always begin working at the point with the longest peak to eave distance. Take your first sheet of.

Adhere the shingles adjacent to the flange with roofing tar. Preparing for a safe job on a steep metal roof requires an assessment of the roof before the job begins. Some roofs are so high and so steep that even working from scaffolding can be dangerous. Use your 1 1 4.

A roofing harness provides the extra security you need when working on such a roof. Try to space the screws about 12 inches apart down the entire piece of metal. It isn t hard as long as you are careful take your time do it right and be safe. Adhere the joint where the cut edges of the shingles meet the dome with roofing tar.

Be sure the larger edge is laid so that the small edge of the next panel will overlap it. To watch the entire series from the beginning click here. The edging or eave flashing consists of metal strips that are used to cover the perimeter of the roof. And for any exposed fasteners try to avoid over tightening them.

You will use metal roofing screws to secure the metal panels to the sheathing. Moreover try to ensure that the screws are all aligned evenly.